Forklift Well Ring Lifter (IWRF-1-H-P)
This unit is suitable for use on both a Forklift or HIAB type of grab.
| SKU | Image | Product | 1+ Prices include VAT Prices exclude VAT | Quantity | |
|---|---|---|---|---|---|
| IWRF-1-CHAIN/DRO | Forklift Well Ring Lifter: Model: Pair Drop Chains x 1000 Long | £152.88 £127.40 | |||
| IWRF-1-CHAIN/RET | Forklift Well Ring Lifter: Model: Single Retention Chain x 1250 Long | £170.04 £141.70 | |||
| IWRF-1-STAND | Forklift Well Ring Lifter: Model: Free Standing Stand | £455.52 £379.60 | |||
| ICS-CHAINS-900-1500 | Forklift Well Ring Lifter: Model: 3 Leg Lifting Chain Set c/w Lifting Eye & Shackle | £460.20 £383.50 | |||
| IWRF-1-(H/P) | Forklift Well Ring Lifter: Model: Well Ring Lifting Frame | £4,616.04 £3,846.70 |
Boost Productivity & Safety | Heavy-Duty Well Forklift Ring Lifter Solution
- Heel pin or thumbscrew retention for safety in use
- Designed for 2 x stacks wheelie bins
- Max Fork section 150 x 50mm
- Fork pockets set at 800mm centres
- Painted bright orange for safety
STANDARD FEATURES
OPERATION
1. Position the forks at the correct distance apart to locate into the fork pockets and drive fully into the pockets.2. Tighten thumbscrew retention on both forks.
3. Remove sprung loaded pins at the top of the trunnion arms in preparation for picking up wheelie bin and undo ratchet strap across the front of the attachment. Ensure the strap does not get caught under the forklift truck.
4. Lift the attachment clear of the floor and with the body of the attachment horizontal to the ground, approach the rear of the bin, positioning the trunnion arms under the trunnions of the bin.
5. Lift the attachment to engage the trunnions and replace the sprung loaded pins to hold the trunnions in place.
6. The ratchet strap is then fastened at the front of the bin to hold it securely into the frame of the attachment.
7. The whole unit can now be moved to the discharge area and the handbrake applied, ready for lifting.
8. Before lifting, remove the loop chain from the storage box.
9. Once lifted into the correct emptying position and height, operate the gearbox by means of the continuous loop chain and rotate the bin forwards to empty the contents.
10. The gear box can be left at any angle during the unloading process and will hold in place at any angle when left unattended.
11. Once discharged, rotate the bin back to horizontal, lower to the floor and replace the loop chain into the storage box for travelling.
12. The ratchet strap is then released, trunnion pins removed and the attachment reversed away from the bin.
13. You are now ready for your next lift.
MAINTENANCE
1. The Wheelie Bin Lifter should be inspected weekly for general condition with particular attention paid to:A, All weld points.
B, Wear and distortion of fork pockets and heel pin attachments.
C, Any damaged/worn components.
D, General condition of cable, pulley and winch.
2. Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
3. General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
4. This product is certified for six (6) months from the date of manufacture after which it is the customer, responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.
HEALTH & SAFETY
1. The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation, maintenance and that the heel pins are fitted correctly.2. Ensure both the truck and attachments are capable of handling the intended load and its contents.
3. Ensure the thumbscrews are correctly utilised.
4. Do not drive into the fork pockets without unscrewing the thumbscrews from the pockets.
5. Do not shock load the attachment under any circumstances.
6. Do not drive the forklift with the wheelie bin in a dangerously high position.
The Operator should ensure that the above product is used for the purpose that it has been designed, tested and intended to do and no deviation to this occurs. If in doubt, consult your Fork Truck Dealer or approved Attachment Supplier
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.
Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.Â
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
