Forklift Stone Bag Lifter
Forklift Stone Bag Lifter

Forklift Stone Bag Lifter (ISBC-1)

The Fork Mounted Sand Bag Carrier provides a simple and effective method of moving full or partially complete sandbags/bulk bags/tonne bags around your site/yard. Due to its extended load centre, the bags' potential ripping on the mast's foot is eliminated, and the built-in fork pockets also provide convenience and efficiency.
Forklift Stone Bag Lifter + ISBC-1 + Delivery in 3-5 Working Days
Invicta Forks & Attachments: Forklift Stone Bag Lifter
Capacity
From £886.08 (inc. VAT)£738.40 (ex. VAT)
Forklift Stone Bag Lifter + ISBC-1 + Delivery in 3-5 Working Days

Stone Bag Lifter - Enhance Safety and Efficiency in Stone Bag Handling


STANDARD FEATURES
  • Four smooth profile lifting lugs
  • Zinc Plated Heel Pins for safe attachment to truck
  • Painted bright orange for safety
OPERATION
  1. Position the forks to the correct distance apart to locate into fork pockets.
  2. Remove the heel pins from the attachment.
  3. Drive the forks into the fork pockets.
  4. Insert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into hole provided.
  5. The attachment is now ready for use.
    MAINTENANCE
    1. The Bulk Bag Carrier should be inspected weekly for general condition with particular attention paid to:

    A- All weld points
    B- Wear and distortion of fork pockets and heel pin attachments
    C- Any damaged/worn components

    1. Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
    2. General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
    3. This product is certified for six (6) months from the date of manufacture, after which it is the customer, responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.
      HEALTH & SAFETY
      1. The department manager or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation, and maintenance and that the heel pins are fitted.
      2. Ensure both the truck and attachments are capable of handling the intended load and its contents
      3. Ensure that the heel pins are correctly inserted, retained and positioned in relation to the heel of the fork prior to each and every use.
      4. Do not drive into the fork pockets without removing the heel pins.
      5. Ensure only vertical lifts are made and not angular lifts when using the attachment.
      6. Ensure an appropriate speed and direction is maintained to minimise the potential of a swinging load.
      7. Do not shock load the attachment under any circumstances.
      8. The safe working load must not be exceeded.
      9. Ensure that the mast remains in the vertical position at all times.
        Model
        Capacity (kg)
        Load Centre (mm)
        Fork Spread (mm)
        Max Fork Size (mm)
        Weight (Kg)
        C of G (mm)
        ISBC-I
        1000
        885
        600
        125 x 50
        72
        640
        ISBC-2
        2000
        885
        600
        125 x 50
        72
        640

        Delivery in 3-5 Working Days

        Delivery charges will be calculated at checkout.

        Standard delivery is free on all orders to Mainland UK above £100 excluding VAT. Some exclusions apply

        1-2 Day delivery is available on stock items only and, where available, charges for 1-2 Day delivery are calculated at checkout. Orders for 1-2 delivery need to be placed by 1:00pm unless otherwise stated.

        Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.

        The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.

        Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.

        Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.

        From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer.  We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.

        RETURN OF GOODS

        In the unlikely event of you not being satisfied with any product, please contact us without delay.

        Faulty Goods or Incorrect Item Received

        Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.

        Once we have received the goods at our premises a replacement will be dispatched to you.

        Unwanted Goods

        If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.

        You will be responsible for the cost of returning the goods to us.

        The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied.  For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.

        It is your responsibility to take reasonable care of the goods.  Goods will be inspected before a refund is made.  If the goods suffer damage or neglect whilst in your care a claim may be made.

        You must decide before ordering if the goods are suitable for your needs.

        We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200. 

        For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.

        COMPANY INFORMATION
        DON'T MISS OUT

        Want to know about the latest product news, special events and occassionaly exclusive discounts? Join our newsletter below.

        Copyright © 2024