Forklift Loadlifter (LOADLIFTER)
Forklift Load lifter | Top-Quality Load Lifting Solution for Industrial Use
- Lowerable ladder for safe access for personnel
- Rubber buffered wings to limit entry into rear of vehicle
- Retention rope to minimize cage movement
- Maximum fork section 100 x 45 mm at 1000 mm centres
- Painted bright orange for safety
STANDARD FEATURES
OPERATION
- The product must be positioned on level ground.
- Position the forks to the correct distance apart to locate into fork pockets.
- Drive forks fully into fork pockets.
- Unlatch the safety chains and re-couple to keep bracket.
- Load the load lifter with 2 or 3 cages (dependent upon type of cage).
- Re-attach the safety chains.
- Lift the load lifter so that the two retaining brackets (Yellow in colour) fully engage with the forklift carriage.
- Apply required back tilt of the forklift mast.
- Proceed to the open lorry approaching square on and not angular.
- Lift the Load lifter above the lorry bed height and proceed forward into the lorry so that the side handrails are within the sides of the lorry.
- Realign forklift mast to the vertical position and lower onto the lorry bed ensuring that the retaining brackets are still engaged to the forklift carriage.
- Unlatch the safety chains and re-couple to keep bracket and remove the cages
- Once empty lift the Load lifter and reverse away for the next operation.
MAINTENANCE
- The Load lifter should be inspected weekly for general condition with particular attention paid to: A, All weld points, B, Wear & distortion of fork pockets and retaining brackets, C, Safety Chains
- General surface rusting especially in critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
- All hinges, latches and locks must be kept lightly greased (where applicable)
- Damage or failure must be reported or rectified immediately prior to re-use of the Load lifter.
HEALTH & SAFETY
- The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation and maintenance
- The fork truck handbrake must be applied when elevating and lowering the Load lifter and when the forklift stationary always.
- Ensure that the retaining brackets are correctly inserted and positioned prior to each use and every use.
- Always make sure the Load lifter maximum load is not exceeded.
- The driver must ensure a slow, uniform pace is maintained, at ground level, whilst moving and positioning the Load lifter and keep clear of obstructions.
- Always drive with the Load lifter in its lowest possible position.
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.
Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.Â
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
