Forklift Load Protection Buffers (ILPB)
| SKU | Image | Product | 1+ Prices include VAT Prices exclude VAT | Quantity | |
|---|---|---|---|---|---|
| ILPB/100/50 | Forklift Load Protection Buffers: Size H x W mm: 460mm Long | 100mm x 50mm Forks | £510.00 £425.00 | |||
| ILPB/100/50-2 | Forklift Load Protection Buffers: Size H x W mm: 560mm Long | 100mm x 50mm Forks | £534.00 £445.00 | |||
| ILPB/130/60 | Forklift Load Protection Buffers: Size H x W mm: 560mm Long | 130mm x 60mm Forks | £582.00 £485.00 | |||
| ILPB/150/60 | Forklift Load Protection Buffers: Size H x W mm: 720mm Long | 150mm x 60mm Forks | £591.00 £492.50 |
Forklift Load Protection Buffers for Equipment Safety
The forklift load protection buffers are made specifically to reduce damage to fragile finished loads from fork back height when being loaded or unloaded by a forklift truck. The Load Buffer is held in position magnetically and is easily attached to the fork's face. Saves time and money spent on decanting damaged goods.
STANDARD FEATURES
- Magnetically attaches to the fork uprights
- Easily swapped between trucks on site
- 25mm thick encapsulated foam pad
- Painted bright orange for safety
- Supplied as a pair
OPERATION
- Position forks to desired distance apart and at waist height.
- Ensure the fork surface is clean, dry, and free from foreign objects.
- Identify the magnetic side of the cover and place face down toward the forks upright (shank)
- Ensure the buffers are straight and test for correct adherence.
- The load protection buffers are now ready to use.
- Removal is the opposite of installation.
MAINTENANCE
1. The load protection buffers should be inspected before use for general condition with attention paid to:
A, Splits and tears in the rubber surface
B, Debris stuck to the magnetic surface
2. Damage or failure must be reported.
3. Load buffer may require re-positioning after usage, due to friction between buffer & protected load.
HEALTH & SAFETY
- The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation, maintenance, and correct installation.
- While positioning the buffers, keep fingers free of the spaces between the fork surface and the buffers due to risk of crushing between the surfaces.
- Do not wear metal-based necklaces, bracelets etc, as they will be attracted to the magnetic field generated by the magnets on the underside of the load buffers.
- To minimise the trapping of fingers, It is recommended that suitable gloves are worn for the installation.
The operator should ensure that the above product is used for the purpose that us has been designed, tested, and intended to do and no deviation to this occurs. If in doubt, consult your fork truck dealer or approved attachment supplier.
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.
Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.Â
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
