Forklift 1100 Litre Wheelie Bin Lifter (IWBL-2)
Maximise Waste Management Efficiency with the 1100 Litre Forklift Bin Lifter
- Winch complete with mounting bracket and 3mm diameter lifting wire
- Fixed rotating pulley wheel
- Zinc-plated heel pins for safe attachment to truck
- Painted bright orange for safety
STANDARD FEATURES
OPERATION
- Position Winch on front left hand Overhead Guard Leg ensuring that the cable is positioned to the outer face of the truck, using the clamping plates and 4 bolt fixings (length of threaded bar to be cut down to suit accordingly).
- Position the forks to the correct distance apart to locate into fork pockets of the attachment.
- Remove the heel pins from the attachment.
- Drive the forks into the fork pockets.
- Insert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into hole provided.
- Pull the looped end of the winch cable through the pulley on the attachment.
- Approach the Wheelie Bin from the rear and position the two profiled hooks under each Wheelie Bin handles and Lift.
- Raise the Wheelie Bin so as the wheel is at waist height and attach the looped cable over the left hand wheel and then lower to safe level.
- Proceed to the tipping area and once correctly positioned raise the wheelie bin to the desired height ensuring that the safety catch on the winch is released prior to lifting.
- Once at the correct height start to wind the winch until the contents of the Wheelie are fully discharged (you may want to engage the safety catch so as to hold the position of the wheelie bin).
- Once empty release the safety catch (if engaged) ensuring that you have hold on the winch handle prior to its release and continue to unwind until the wheelie bin is near vertical again.
- Remove the looped cable from the Wheelie Bin and lower to the ground.
- You are ready for your next lift
MAINTENANCE
- The Wheelie Bin Lifter should be inspected weekly for general condition with particular attention paid to: A, All weld points, B, Wear and distortion of fork pockets and heel pin attachments, C, Any damaged/worn components, D, General condition of cable, pulley and winch.
- Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
- General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
- This product is certified for six (6) months from the date of manufacture after which it is the customer, responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.
HEALTH & SAFETY
- The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation, and maintenance and that the heel pins are fitted correctly.
- Ensure both the truck and attachments are capable of handling the intended load and its contents.
- Ensure that the heel pins are correctly inserted, retained and positioned in relation to the heel of the fork prior to each and every use.
- Do not drive into the fork pockets without removing the heel pins.
- Do not shock load the attachment under any circumstances.
- Ensure that the operative has hold of the winch handle prior to releasing the winch safety catch.
- Do not drive the forklift with the wheelie bin in a dangerously high position.
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.
Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.Â
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
