Invicta Fork Mounted Magnet – Efficient Steel Debris Collection (IFMM-1200)
A simple but effective method of clearing factory floors, car parks and goods yards of unwanted steel debris that could otherwise present a hazard to pneumatic tyres and operatives alike.
Standard Feature
• Facility to hang from the Fork Mounted Sweeper
• Polished stainless steel finish
• Maximum fork section 150 x 60 mm at 683 mm centres
• Zinc-plated twist screws for safe attachment to truck
Model Specifications
IFMM-1220 – Width 1200mm – Weight 52kg – Centre of Gravity 55mm – LLC N/A
IFMM-1800 – Width 1800mm – Weight 78kg – Centre of Gravity 55mm – LLC N/A
Operations
• Position forks to desired distance apart
• Drive forks into the fork pockets above the magnet
• Tighten the thumbscrew retention onto the forks, ensuring they are adequately tightened
• The attachment is now ready for use
• Position the magnet 75–100mm from the level floor and drive at the appropriate speed to suit the type of waste and terrain for effective collection
• When finished, raise the magnet to a workable height and scrape the magnet to remove the collected product from the base into a receptacle
Maintenance
• The magnet should be inspected weekly for general condition with particular attention paid to:
A. All weld points
B. Wear and distortion of thumbscrew attachments
• Damage or failure must be reported and rectified immediately before re-use
• This product is certified for six (6) months from the date of manufacture, after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE
Health & Safety
• The department manager or section where the attachment is to be used must ensure the operators are fully conversant with the attachment, its operation, and maintenance, and that the thumbscrews are fitted correctly
• Ensure the truck and attachments can handle the intended load and contents
• Ensure the shackle pin is adequately tightened before each use
• Ensure the thumb screws are not tightened onto the taper of the blade
• On removal of the magnet's collections, please be aware of sharp steel and remove risk by wearing safety gloves
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT. Some exclusions apply
1-2 Day delivery is available on stock items only and, where available, charges for 1-2 Day delivery are calculated at checkout. Orders for 1-2 delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
