DrainProTector Silt & Gravel Drain Filter (DT-SIL)
| SKU | Product | 1+ Prices include VAT Prices exclude VAT | 5+ Prices include VAT Prices exclude VAT | Quantity | |
|---|---|---|---|---|---|
| DT-SIL | DrainProTector Silt & Gravel Drain Filter: Drain Port Size: 25cm Diameter | £47.51 £39.59 | £31.50 £26.25 | ||
| DT-SIL-XL | DrainProTector Silt & Gravel Drain Filter: Drain Port Size: 2 × 25cm Diameter | £73.82 £61.52 | £57.00 £47.50 |
Book Your Free Spill Product Survey
Make sure your workplace has the right spill kits, absorbents and spill control products in the right locations with a free on-site survey from Premier Storage.
DrainProTector Silt & Gravel Drain Filter
The DrainProTector Silt & Gravel Drain Filter provides a simple and effective solution for preventing silt, sand, gravel and other solid debris from entering surface water drains.
Designed for demanding construction, civil engineering and industrial environments, the DrainProTector sits within the drain and captures sediment while allowing water to continue flowing through the filtration system.
Its third-generation design incorporates unique support straps, allowing the filter to retain up to 22kg of sediment before emptying is required.
Prevent Silt, Sand and Gravel Entering Drains
Construction sites, wheel wash stations and busy access routes can generate significant quantities of mud, grit, sand and loose aggregate. If this material enters drainage systems, it can lead to blockages, maintenance requirements and costly site disruption.
The DrainProTector captures these solids at the drain before they can travel further into the drainage system, helping to keep drains clear and reduce the need for unblocking and cleaning.
Retains Up to 22kg of Sediment
The DrainProTector incorporates strong support straps that allow the filter to hold up to 22kg of collected sediment.
This substantial capacity means the unit can continue operating between maintenance intervals, while the reusable design allows collected material to be removed before the filter is returned to service.
Water Continues to Flow Through the Filter
The filter is designed to capture solid contaminants while allowing water to drain away.
Water is discharged through the filtration system to EA-accepted levels, helping sites manage sediment without unnecessarily restricting drainage flow.
Easy to Empty and Reuse
DrainProTector is designed for repeated use. Once sediment has accumulated, the filter can be emptied, inspected and returned to service.
It can also be emptied in situ where site conditions allow, helping reduce maintenance time and disruption.
Quick 3 Minute Installation
The DrainProTector is designed to be installed quickly, with a typical installation time of approximately 3 minutes.
Easy-to-follow installation instructions are printed directly onto the unit, helping site teams install and maintain the filter correctly without needing separate instruction sheets.
Standard and XL DrainProTector Sizes
The Silt & Gravel DrainProTector is available in two sizes to suit different drain configurations.
Standard DrainProTector - DT-SIL
- Overall size: 750 x 600mm
- Drain port: 250mm diameter
- Product code: DT-SIL
XL DrainProTector - DT-SIL-XL
- Overall size: 1250 x 1250mm
- Drain ports: 2 x 250mm diameter
- Product code: DT-SIL-XL
Key Features
- Designed to trap silt, sand, gravel and solid debris
- Helps prevent drain blockages
- Retains up to 22kg of sediment
- Unique support straps provide additional carrying capacity
- Allows filtered water to continue flowing into the drain
- Water discharged to EA-accepted levels
- Hard-wearing construction for demanding site use
- Easy to empty and reuse
- Can be emptied in situ where appropriate
- Installation instructions printed directly onto the unit
- Typical installation time of approximately 3 minutes
- Available in Standard and XL sizes
Typical Applications
- Construction sites
- Building sites
- Wheel wash stations
- Construction site access points
- Civil engineering projects
- Motorway projects
- Roadworks
- Industrial yards
- Areas with heavy sediment run-off
- Sites where silt and gravel may enter surface drains
Reduce Drain Maintenance and Site Downtime
Preventing sediment from entering the drainage system can help reduce the time and cost associated with blocked drains, cleaning operations and site disruption.
By capturing contaminants directly at the drain, the DrainProTector provides a practical first line of defence against sediment-related drainage problems.
Product Specifications
- Product type: Reusable drain sediment filter
- Contaminants captured: Silt, sand, gravel and other solid debris
- Maximum sediment retention: Up to 22kg
- Reusable: Yes
- Empty in situ: Yes, where appropriate
- Installation time: Approximately 3 minutes
- Available sizes: Standard and XL
- Standard size: 750 x 600mm
- XL size: 1250 x 1250mm
Drain Protection for Construction and Industrial Sites
The DrainProTector Silt & Gravel Drain Filter is particularly suited to locations where loose sediment can be carried towards drainage systems by rainfall, vehicle movements or site wash-down activities.
Its combination of high sediment capacity, reusable construction and quick installation makes it a practical pollution prevention and drain protection solution for busy sites.
Delivery charges are calculated at checkout based on the products ordered and delivery location.
Most standard Mainland UK orders over £120 excluding VAT qualify for free delivery. Some exclusions apply, including certain oversized, heavy, made-to-order, or specialist delivery items.
Additional delivery charges may apply to some regions, including the Scottish Highlands & Islands, Northern Ireland, the Channel Islands, and the Isle of Man.
1-2 Day delivery is available on stock items only and, where available, charges for 1-2 Day delivery are calculated at checkout. Orders for 1-2 delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver goods in instalments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchaser’s premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and may require a signature upon delivery. If the courier is unable to complete delivery, a card may be left and the goods returned to the local depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are supplied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
Customers are responsible for ensuring products are suitable for their intended application prior to ordering.
We cannot accept returns of goods that have been made to your particular specifications or manufactured to order as indicated by the delivery status icons. If you are unsure please call 01302 300200.
For business customers returns may be subject to a handling/restocking charge not exceeding 30% of the net price of the goods.
This version is designed to collect silt, sand, gravel and other solid debris.
Fentex states that the standard DrainProTector can retain up to 22kg of sediment.
Yes. Fentex describes the DrainProTector as reusable and says it can be emptied in situ.
Fentex states that the unit can be installed in around three minutes when the drain and surface are suitable.
