Spill Tector - Spill Trapper Medium
Spill Tector - Spill Trapper Medium
Spill Tector - Spill Trapper Medium
Spill Tector - Spill Trapper Medium
Spill Tector - Spill Trapper Medium

Spill Tector - Spill Trapper Medium (ST-MED)

Put Spill Tector under small plant, machinery and tanks to trap and absorb oil and fuel leaks without any interruption to the job. Oil and fuel leaks are trapped in a unique absorbent laminate while clean rainwater is allowed to run away, allowing work to continue without harm to the environment.

Spill Tector - Spill Trapper Medium + ST-MED + Delivery in 3-5 Working Days
Fentex: Spill Tector - Spill Trapper Medium
£66.17 (inc. VAT)£55.14 (ex. VAT)RRP £89.09
Spill Tector - Spill Trapper Medium + ST-MED + Delivery in 3-5 Working Days

Spill Tector - Spill Trapper Medium


Put SpillTrapper under small plant, machinery and tanks to trap and absorb oil and fuel leaks without any interruption to the job.

Oil and fuel leaks are trapped in a unique absorbent laminate while clean rainwater is allowed to run away, allowing work to continue without harm to the environment.


  • Twice the absorbency of other spill traps
  • Up to 40% less expensive than other spill traps
  • Exceeds Environment Agency requirements for this type of spillage protection

FLEXIBLE sidewalls allow plant and machinery to be wheeled into place easily

TOUGH mesh grid withstands heavy use while allowing oil to soak into sorbent material

ABSORBENT Laminate traps oil and fuel leaks but allows rainwater to run away

EVO Technology Burst cotton fibre technology for unrivalled oil absorbency and retention

UNIQUE SORBENT LAMINATE


  • HEAVY-DUTY, high-profile edging enhances robust construction
  • TOP LAYER of tough, durable plastic mesh prevents damage from plant and machinery
  • HYDROPHOBIC ABSORBENT LAYER rejects rainwater and only absorbs oils and fuels
  • EVO burst cotton fibre technology LAYER gives SpillTrapper unrivalled oil absorbency and retention
  • IMPERMEABLE MEMBRANE evenly spreads the oil and fuel throughout the top two absorbent layers
  • BASE LAYER of hydrophobic oil and fuel absorbent adds secondary protection to escaping water

SpillTrapper fits under a wide range of plant and machinery to trap oil and fuel leaks. Clean rainwater simply won t be absorbed and is safely channelled away enabling SpillTrapper to continue working even in bad weather. Meanwhile, the ground underneath stays protected from oil and fuel leaks, eliminating the need to spend time and money on ground remediation.


Code
Size
Absorbency
Type
ST-SML
550 x 700 x 100mm
4 Litres
Tray
ST-MED
700 x 1050 x 100mm
9 Litres
Tray
ST-LGE
1000 x 1500 x 100mm
18 Litres
Tray
ST-XL
1370 x 2000 x 100mm
32 Litres
Tray
ST-MAT-SML-2
510 x 660 x 100mm
4 Litres each
Replacement Mat
ST-MAT-MED-2
660 x 1010 x 100mm
9 Litres each
Replacement Mat
ST-MAT-LGE-2
960 x 1460 x 100mm
18 Litres each
Replacement Mat
ST-MAT-XL-2
1330 x 1960 x 100mm
32 Litres each
Replacement Mat

Dimensions: 700 x 1050mm

Delivery in 3-5 Working Days

Delivery charges will be calculated at checkout.

Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.

Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.

Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.

The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.

Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.

Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.

From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer.  We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.

RETURN OF GOODS

In the unlikely event of you not being satisfied with any product, please contact us without delay.

Faulty Goods or Incorrect Item Received

Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.

Once we have received the goods at our premises a replacement will be dispatched to you.

Unwanted Goods

If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.

You will be responsible for the cost of returning the goods to us.

The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied.  For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.

It is your responsibility to take reasonable care of the goods.  Goods will be inspected before a refund is made.  If the goods suffer damage or neglect whilst in your care a claim may be made.

You must decide before ordering if the goods are suitable for your needs.

We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200. 

For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.

COMPANY INFORMATION

DON'T MISS OUT

Want to know about the latest product news, special events and occassionaly exclusive discounts? Then sign up for our newsletter by clicking here

Copyright © 2024