Haverland 1 kW Designer XR Energy Efficient Electric Radiator

This question was asked by
andrew cridland

when installing these heaters the cable length is 1.5 can the cable run behind the heater to reach the left or right mains socket to plugin with 13 amp plug depending on which side the cable is fixed to the heater.

Good Morning,

Thank you for your message.

What we would recommend is you take the cable feed this approx. 4 inch down and then run across. This is to give a clear spacing for airflow and to avoid the cable overheating against the element which is based at the bottom of the heater or the pressed steel which the Radiator is made from.

Kind regards,

Lewis Dowson