Forklift Four Fork Attachment
Forklift Four Fork Attachment
Forklift Four Fork Attachment
Forklift Four Fork Attachment
Forklift Four Fork Attachment
Forklift Four Fork Attachment

Forklift Four Fork Attachment (IFF-1)

Designed to provide a method of lifting and moving unpalletized loads such as timber planks, sheet steel and tubing, plastic pipes and concrete lintels safely and, in turn, minimising the potential of damaging the product.
Forklift Four Fork Attachment + IFF-1 + Delivery in 3-5 Working Days
Invicta Forks & Attachments: Forklift Four Fork Attachment
Capacity
From £1,491.00 (inc. VAT)£1,242.50 (ex. VAT)
Forklift Four Fork Attachment + IFF-1 + Delivery in 3-5 Working Days

Forklift Four Fork Attachment C Balance - Unpalletized Load Lifting Solution

Standard Feature
  • Inner fork pocket positioned to suit site application (advice on placement of order; otherwise, set at 683crs as standard)
  • Smooth profiled fork pockets to ensure product care
  • Zinc-plated heel pins for safe attachment to truck
  • Painted bright orange for safety


Model
Weight (kg)
C of G (mm)
LLC (mm)
Attachment Width (mm)
Pocket Length (mm)
Max Fork (mm)
Capacity (kg) at 600mm L.C
IFF-1
140
335
100
1500
1200
150 x 50
1500
IFF-2
160
295
100
2000
1200
150 x 50
2000
IFF-3
178
265
100
2500
1200
150 x 50
2500
IFF-4
230
235
100
3000
1200
150 x 50
3000

Operations

  • Position the forks to the correct distance apart to locate them into fork pockets.
  • Remove the heel pins from the attachment.
  • Drive the forks into the fork pockets.
  • Insert fork pocket heel pins directly behind the heel of the fork and attach a safety lynch pin into the hole
  • The attachment is now ready for use.

    Maintenance

    • The Four Fork Attachment should be inspected weekly for the general condition with particular attention paid to A, All weld points, B, Wear and distortion of fork pockets and heel pin attachments, C, Any damaged/worn components, D, Alignment of the outer forks
    • Damage or failure must be reported and rectified immediately before re-using of the attachment.
    • Especially in critical areas, general surface rusting should be treated with proprietary inhibitors, primers and paint regularly.
    • This product is certified for six (6) months from the date of manufacture, after which it is the customer, responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.

        Health & Safety

        • The department manager or section where the attachment is to be used must ensure the operators are fully conversant with the attachment, its operation, and maintenance and that the heel pins are fitted correctly.
        • Ensure the truck and attachments can handle the intended load and contents.
        • The load must be spread equally over all 4 forks.
        • Ensure that the heel pins are correctly inserted, retained and positioned about the fork's heel before every use.
        • Do not drive into the fork pockets without removing the heel pins.
        • Do not shock load the attachment under any circumstances.
        • The safe working load must not be exceeded at each lifting point.

        Delivery in 3-5 Working Days

        Delivery charges will be calculated at checkout.

        Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.

        Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.

        Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.

        The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.

        Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.

        Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.

        From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer.  We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.

        RETURN OF GOODS

        In the unlikely event of you not being satisfied with any product, please contact us without delay.

        Faulty Goods or Incorrect Item Received

        Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.

        Once we have received the goods at our premises a replacement will be dispatched to you.

        Unwanted Goods

        If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.

        You will be responsible for the cost of returning the goods to us.

        The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied.  For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.

        It is your responsibility to take reasonable care of the goods.  Goods will be inspected before a refund is made.  If the goods suffer damage or neglect whilst in your care a claim may be made.

        You must decide before ordering if the goods are suitable for your needs.

        We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200. 

        For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.

        COMPANY INFORMATION

        DON'T MISS OUT

        Want to know about the latest product news, special events and occassionaly exclusive discounts? Then sign up for our newsletter by clicking here

        Copyright © 2024