Carriage Mounted Jib (Up To 6000Kg) (ICJ-1.0)
Heavy-Duty Invicta Carriage Mounted Jib
The Carriage Mounted Jib is designed to handle the most demanding lifting tasks. This heavy-duty jib arm is constructed of high-quality steel and features a 1000kg capacity, ensuring efficient operations. Its easy-to-use design is ideal for construction sites, warehouses, factories, recycling centres, landscapers, gardeners, and more. The ergonomic design and practical features make it a safe and effective solution for lifting heavy loads and promoting a secure working environment. Experience the durability and efficiency of the Invicta Carriage Mounted Jib from Premier Storage today!
Standard Feature
- Multi-hook positioning from 1000-1750 load centres
- Supplied complete with Swivel hook and bow shackle
- Quick-release bottom hangers are supplied as standard
- Lifting the eye at the centre of gravity for ease of movement and mounting it onto the forklift
- Painted bright orange for safety
Operations
- Remove existing forks from the forklift carriage.
- Position Jib so the load beam is parallel to the finish floor level.
- Remove the quick-release bottom hangers by pulling out the safety - clip and retracting the retaining pin.
- Position the forklift behind the Jib back plate and centralise the forklift carriage with the Jib back plate.
- Drive towards the Jib back plate with the mast tilted forward and hook the top carriage rail under the top hangers, ensuring that the location peg on the jib back plate locates into the central castellation of the forklift carriage.
- While raising the forklift carriage, tilt the mast back to the vertical position until the attachment of the finish floor level is clear.
- Reposition the quick-release bottom hangers, ensuring the safety - clip is correctly inserted.
- Position the swivel hook and shackle to the desired lifting point, ensuring that the shackle is adequately tightened.
- The attachment is now ready for use.
Maintenance
- The Carriage Mounted Jib should be inspected weekly for the general condition with particular attention paid to: A, All weld points, B, Wear and distortion of quick-release bottom hangers, C, Any damaged/worn components, D, General condition of swivel hook, safety latch and shackle
- Damage or failure must be reported and rectified immediately before re-using the attachment.
- Especially in critical areas, general surface rusting should be regularly treated with proprietary inhibitors, primers, and paint.
- This product is certified for six (6) months from the date of manufacture, after which it is the customer, responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.
Health & Safety
- The department manager or section where the attachment is to be used must ensure the operators are fully conversant with the attachment, its operation and maintenance and that the retaining pins are fitted.
- Ensure the truck and attachments can handle the intended load and contents.
- Ensure the shackle pins are adequately tightened before each use.
- Do not attach the Jib to the forklift carriage without removing the quick-release bottom hangers.
- When using this attachment, ensure only vertical lifts are made, not angular ones.
- Do not shock load the attachment under any circumstances.
- The safe working load must not be exceeded at each lifting point.
Delivery charges will be calculated at checkout.
Standard delivery is free on all orders to Mainland UK above £100 excluding VAT.
Next Day delivery is available on stock items only and, where available, charges for Next Day delivery are calculated at checkout. Orders for next day delivery need to be placed by 1:00pm unless otherwise stated.
Delivery dates are estimates only and the company shall not be liable for any loss or damage resulting from any delay in delivery. In particular we shall not be liable for any matter which results from any act of God, war or riot, extreme weather, strikes or any other events which are beyond our control.
The company reserves the right to deliver Goods by installments, each installment being treated as a separate contract.
Goods will be delivered at the point most convenient to our carrier, usually the goods inwards department or reception on the ground floor. Further transfer or installation within the purchasers premises, particularly for large or heavy items, must be arranged prior to delivery and will be charged extra.
Goods are delivered by courier and a signature is required, if the courier is unable to make delivery a card will be left and the goods returned to the depot. Redelivery will usually be attempted on the next working day or arrangements can be made to collect the goods from the delivery depot. It is your responsibility to advise of any special delivery requirements at the time of order.
From time to time our shipping providers make an additional charge for delivery to some areas, for example Northern Ireland and the Scottish Highlands and Islands, in these cases we reserve the right to pass that additional cost on to our customer. We will make contact with you to obtain further payment to cover additional shipping costs, if you do not wish to make the additional payment a full refund will be offered and your order will be cancelled.
RETURN OF GOODS
In the unlikely event of you not being satisfied with any product, please contact us without delay.
Faulty Goods or Incorrect Item Received
Should the goods you receive be faulty or if we have delivered the wrong product you must inform us within 24 hours of receipt (or the next working day), we guarantee to accept return of such goods without charge.
Once we have received the goods at our premises a replacement will be dispatched to you.
Unwanted Goods
If you decide that you wish to cancel your order, you must notify us, in writing, within 7 working days of receipt.
You will be responsible for the cost of returning the goods to us.
The goods must be returned in a completely resalable condition, in the original packaging, complete with all parts and accessories as supplied. For furniture items that are suppied in flat pack form, we may not be able to accept return if the item has been assembled.
It is your responsibility to take reasonable care of the goods. Goods will be inspected before a refund is made. If the goods suffer damage or neglect whilst in your care a claim may be made.
You must decide before ordering if the goods are suitable for your needs.
We cannot accept return of goods that have been made to your particular specifications or manufactured to order as per below delivery status icons. If you are unsure please call 01302 300200.Â
For business customers returns may be subject to a handling/restocking charge not exceeding 25% of the net price of the goods.
